 |
|
|
| >
VIEW ACCESSORIES |
| |
Specifications
Brightness:
High 80 Lumens
Low 5 Lumens
Run-Time:
High 60 Minutes
Low 3 Hours
Batteries:
Two CR-123A (Primary Light)
One 544 (Laser)
Bezel Size: 1.25"
Length: 5.5" (140 mm)
Weight: 8.0 oz. (231 g)
Lamp: B-X2
Primary Tail-Cap: TR6 Brightness Controllable
Sidepod Tail-Cap: MTC2
 |
Features
* Xenon Gas-Filled Primary Lamp
* Brightness Controllable Remote Switch
* Textured Beam Smoothing Reflector Lens
* Offset 5mW Red Laser
* Aerospace Grade Aluminum Body
* Cross-Bolt Screw Weapon Mount
* Replaceable Tempered Glass Front Lens
* Mil Spec Type III Hard Anodized Exterior
* Complete Double O-Ring Sealing
The offset laser can be easily activated via the thumb of the vertical foregrip holding hand.
|
|
 |
 |
Description
MD2 LaserLight integrates two essential elements into one compact system: tactical illumination and target designation. When the military carries out urban warfare or when SWAT team conducts tactical operation, this integration of the light and laser with the ultra compact cross bolt screw weapon mount reduces the overall form factor. As a 6-volt tactical light system, MD2 Xenon LaserLight is pre-configured with a 80-lumen xenon light. The light source is protected by an anti-scratch tempered glass lens and is maximally focused at factory for achieving the greatest distance and center brightness. The xenon bulb is damped against recoil by the internal spring loaded back-plate deflection mechanism. MD2 LaserLight features an offset visible red laser sight for target assistance and threat deterrence. The laser can be calibrated for windage and elevation with a laser bore sight kit. The laser sight module is interchangeable with an optional side LED light for providing supplemental IR source, low visibility red light, or reduced signature NVG-compatible light. Manufactured by high precision CNC machine from aerospace grade aluminum with anti-abrasive, anti-corrosive, and anti-reflective military spec Type III hard anodized exterior finish, MD2 Xenon LaserLight is rugged and durable for illumination in the most critical environments. The anti-reflective finish reduces glare and minimizes signature for ensuring stealth. MD2 LaserLight is preconfigured with TR6 brightness controllable remote switch tail-cap. The low setting switch momentarily turns on the light at low light output, just enough for staging and navigation prior to assault. Pressing the pad switches the light on high output. Under duress, pressing both low and high switches turns on the light at high setting. Clicking the constant-on switch turns on the light at high output and stays on. All switches are at finger length distance for easy and instant operation. The independent MTC2 sidepod tail-cap switch easily activates the offset laser and can be placed in constant-on position for calibration. Since the laser is offset from the rail, its tail switch can be easily activated via thumb action when a vertical handgrip is installed. All connections of the primary compartment are sealed with double O-rings for fail-safe protection against water leakage. Each MD2 LaserLight is individually serialized for inventory control. The unit can be easily serviced in the field with a Field Service Kit, including the option of replacing the front tempered glass lens if damaged during an unexpected frontal impact. MD2 LaserLight is the choice for the military and law enforcement when illumination and precision are both at the top of consideration.
Online Support: Available |
| Warranty:
Limited Lifetime |
| Model
#: MD2-XL-TR |
|
